Fees & Charges
All solid waste originating within the boundaries of the Comox Valley and Strathcona Regional Districts can be brought to the Comox Valley Waste Management Centre, the Campbell River Waste Management Centre, or any CSWM transfer station at the rates shown below.
All prices are per metric tonne and will be pro-rated for any portion thereof, subject to a minimum charge.
Community clean-up events may be eligible for a fee waiver:
Please be aware:
- Loads containing prohibited waste or loads containing more than 10 per cent recyclables will be charged at the rates below plus all costs associated with any special handling.
- In the event that the scales provided are not operational, weight shall be estimated by the scale staff employed or contracted by the regional district.
- Recycling facilities are provided for selected commodities, which may be accepted free of charge when placed in the containers provided.
- Improperly covered loads are subject to a $20 fine.
- When within the facility gates, please remember pets and small children are safest if they remain inside the vehicle at all times.
Scale Charges for Waste Disposal
Charges for depositing solid waste, controlled wastes and recyclable materials at the disposal facility as of October 1, 2017:
Site Access Fee
In-Area Charge / tonne
Out-of-Area Charge / tonne
Municipal solid waste (MSW)
$130 / tonne
$260 / tonne
* Only accepted at the CRWMC
$250 / tonne
$500 / tonne
$60 / tonne
Construction and demolition debris
$130 / tonne
$260 / tonne
Controlled waste – advance approval and supporting analytical data required
$180 / tonne
$350 / tonne
Clean fill – advance approval and supporting analytical data required for loads in excess of 1000 kilograms
$15 / tonne
$45 / tonne
$120 / tonne
$225 / tonne
Divertible gypsum (drywall) – advance approval and supporting analytical data required for pre-1990 gypsum
Grass and leaves
Improperly covered or secured load
MSW containing recyclables
$300 / tonne
$600 / tonne
Refrigerant containing materials
$15 / unit
$15 / unit
Yard waste / Invasive Species
$65 / tonne
$195 / tonne
Waste containing friable asbestos fibers or asbestos dust in a concentration greater than 0.5% by weight either at the time of manufacture or as determined using a method specified in section 40(1) of the provincial Hazardous Waste Regulation (B.C. Reg. 63/88). Asbestos containing materials can only be accepted at the Campbell River Waste Management Center.
Uncontaminated material such as soil, rock, sand, gravel, concrete, asphalt, cinder/building blocks and brick. All material must be 30 cm or less in diameter and free from any metal, rebar, mesh and oil or fuel contamination. Soil quantities greater than 1000 kg must have prior approval and be accompanied by supporting analytical data that indicates the material meets Schedule 7, of the Environmental Management Act, Hazardous Waste Regulations.
Clean recyclable materials from commercial, institutional or industrial sources, free from contamination that would render it unrecyclable.
Mixed waste loads produced as a result of the construction, renovation and demolition of buildings, and other structures, and includes wood waste and gypsum coated with material that renders it unsuitable for recycling, but does not include contaminated waste, creosote, PCB treatments, loads mixed with recyclables or any special waste. Loads containing demolition or deconstruction material must be free from asbestos and be accompanied by supporting documentation.
Solid waste requiring special handling at the waste management centre, and includes but is not limited to:
- Creosote pilings or timbers;
- Large dead animals;
- Animals that have been euthanized;
- Steel cables;
- Emergency and disaster debris; and
- Low density/bulky waste including Styrofoam floats, fish coolers and similar items that are of significant bulk but of low density
Off-cuts or scraps from new construction and post-1990 gypsum board or drywall that has been painted or is coated with wall paper, but does not include gypsum or drywall coated with material that renders it unsuitable as a recyclable material. Advance approval and supporting asbestos testing analytical data is required for pre1990 gypsum.
Any wood waste product that is capable of being diverted from the landfill. This includes but is not limited to: pallets, fiber/particle board, oriented strand board (OSB) and plywood, raw dimension lumber and scraps or cut-offs.
A load that is not properly secured, either with a tarpaulin cover or tie-down apparatus to prevent any of the load escaping or falling off the haul vehicle.
Any invasive alien plant species that has the potential to pose undesirable or detrimental impacts on humans, animals or ecosystems and are identified in Schedule ‘A’ of Bylaw No. 2774, being the “Regional District Weed Control Regulation Bylaw 2001".
Recyclable ferrous and non-ferrous metallic materials. It does not include metal that is incorporated into a product or packaging, such as a couch, that does not comprise more than 50% of the product in weight and that cannot be readily separated from the non-metallic components.
Loads of MSW containing 10% or more recyclables or divertible items, at the discretion of the attendant.
Biomedical, radioactive or ignitable waste, or waste that is on fire/smoldering. Drums, extra-large tires, liquids, metals. Motor vehicle bodies and farm implements. Special waste as defined in the Special Water Regulation (BC) including asbestos.
Includes but is not limited to: fridges, freezers, water, coolers, air conditioners. If refrigerant is removed by others, supporting documentation must accompany the item.
Uncontaminated, non-invasive vegetation removed from gardens, lawns, shrubs and trees and includes material that is a maximum diameter of 30 cm.